Discussion:
[PATCH V2 4/4] edac, amd64_edac: Add F15h M60h support
Aravind Gopalakrishnan
2014-10-07 00:04:40 UTC
Permalink
This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
in the processor:
- DDR4(unbuffered, registered); LRDIMM DDR3 support
- relevant debug messages have been modified/added to report these
memory types
- new dbam_to_cs mappers
- if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
cs_size. This multiplier value is obtained from the per-dimm
DCSM register. So, change the interface to accept a 'cs_mask_nr'
value to facilitate this calculation
- new determine_memory_type low_ops
- introduced to remove too many if-else conditions in
determine_memory_type().
- This is now called early in read_mc_regs() to cache dram_type

Misc cleanup:
- amd64_pci_table[] is condensed by using PCI_VDEVICE macro.

Testing details:
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.

Signed-off-by: Aravind Gopalakrishnan <***@amd.com>
---
Changes in V2
- Cache dram_type in amd64_pvt structure (per Boris suggestion)
- Introduce per-family low_ops for determine_memory_type() to reduce
number of if-else statements
- Call this early in read_mc_regs() to cache dram_type
- The debug messages are moved around a bit as a result to print
dram_type immediately

drivers/edac/amd64_edac.c | 253 ++++++++++++++++++++++++++++++++--------------
drivers/edac/amd64_edac.h | 16 ++-
2 files changed, 188 insertions(+), 81 deletions(-)

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index bbd6514..6cc3243 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -692,9 +692,18 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
{
edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr);

- edac_dbg(1, " DIMM type: %sbuffered; all DIMMs support ECC: %s\n",
- (dclr & BIT(16)) ? "un" : "",
- (dclr & BIT(19)) ? "yes" : "no");
+ if (pvt->dram_type == MEM_LRDDR3) {
+ u32 dcsm = pvt->csels[chan].csmasks[0];
+ /*
+ * It's assumed all LRDIMMs in a DCT are going to be of
+ * same 'type' until proven otherwise. So, use a cs
+ * value of '0' here to get dcsm value.
+ */
+ edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
+ }
+
+ edac_dbg(1, "All DIMMs support ECC:%s\n",
+ (dclr & BIT(19)) ? "yes" : "no");

edac_dbg(1, " PAR/ERR parity: %s\n",
(dclr & BIT(8)) ? "enabled" : "disabled");
@@ -756,7 +765,7 @@ static void prep_chip_selects(struct amd64_pvt *pvt)
if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
- } else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ } else if (pvt->fam == 0x15 && pvt->model == 0x30) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
} else {
@@ -813,25 +822,57 @@ static void read_dct_base_mask(struct amd64_pvt *pvt)
}
}

-static enum mem_type determine_memory_type(struct amd64_pvt *pvt, int cs)
+void determine_memory_type_k8(struct amd64_pvt *pvt)
{
- enum mem_type type;
-
- /* F15h supports only DDR3 */
- if (pvt->fam >= 0x15)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
- else if (pvt->fam == 0x10 || pvt->ext_model >= K8_REV_F) {
+ if (pvt->ext_model >= K8_REV_F) {
if (pvt->dchr0 & DDR3_MODE)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR3 : MEM_RDDR3;
else
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR2 : MEM_RDDR2;
} else {
- type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+ pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
}
+}

- amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
+void determine_memory_type_f10(struct amd64_pvt *pvt)
+{
+ if (pvt->dchr0 & DDR3_MODE)
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR3 : MEM_RDDR3;
+ else
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR2 : MEM_RDDR2;
+}

- return type;
+void determine_memory_type_f15(struct amd64_pvt *pvt)
+{
+ if (pvt->model == 0x60) {
+ /*
+ * We use a Chip Select value of '0' to obtain dcsm.
+ * Theoretically, it is possible to populate LRDIMMs
+ * of different 'Rank' value on a DCT. But this is
+ * not a common case. So, it's reasonable to assume
+ * all DIMMs are going to be of same 'type' until
+ * proven otherwise.
+ */
+ u32 dram_ctrl;
+ u32 dcsm = pvt->csels[0].csmasks[0];
+
+ amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL,
+ &dram_ctrl);
+ pvt->dram_type = (((dram_ctrl >> 8) & 0x7) == 0x2) ? MEM_DDR4 :
+ (pvt->dclr0 & BIT(16)) ? MEM_DDR3 :
+ (dcsm & 0x3) ? MEM_LRDDR3 : MEM_RDDR3;
+ } else {
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ }
+}
+
+void determine_memory_type_f16(struct amd64_pvt *pvt)
+{
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
}

/* Get the number of DCT channels the memory controller is using. */
@@ -958,8 +999,12 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
if (WARN_ON(!nb))
return;

- pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1
- : PCI_DEVICE_ID_AMD_15H_NB_F1;
+ if (pvt->model == 0x60)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1;
+ else if (pvt->model == 0x30)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1;
+ else
+ pci_func = PCI_DEVICE_ID_AMD_15H_NB_F1;

f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
if (WARN_ON(!f1))
@@ -1049,7 +1094,7 @@ static int ddr2_cs_size(unsigned i, bool dct_width)
}

static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;

@@ -1167,8 +1212,43 @@ static int ddr3_cs_size(unsigned i, bool dct_width)
return cs_size;
}

+static int ddr3_lrdimm_cs_size(unsigned i, unsigned rank_multiply)
+{
+ unsigned shift = 0;
+ int cs_size = 0;
+
+ if (i < 4 || i == 6)
+ cs_size = -1;
+ else if (i == 12)
+ shift = 7;
+ else if (!(i & 0x1))
+ shift = i >> 1;
+ else
+ shift = (i + 1) >> 1;
+
+ if (cs_size != -1)
+ cs_size = rank_multiply * (128 << shift);
+
+ return cs_size;
+}
+
+static int ddr4_cs_size(unsigned i)
+{
+ int cs_size = 0;
+
+ if (i == 0)
+ cs_size = -1;
+ else if (i == 1)
+ cs_size = 1024;
+ else
+ /* Min cs_size = 1G */
+ cs_size = 1024 * (1 << (i >> 1));
+
+ return cs_size;
+}
+
static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;

@@ -1184,18 +1264,49 @@ static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
* F15h supports only 64bit DCT interfaces
*/
static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);

return ddr3_cs_size(cs_mode, false);
}

+/* F15h M60h supports DDR4 mapping as well.. */
+static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr)
+{
+ int cs_size;
+ u32 dcsm = pvt->csels[dct].csmasks[cs_mask_nr];
+
+ WARN_ON(cs_mode > 12);
+
+ if (pvt->dram_type == MEM_DDR4) {
+ if (cs_mode > 9)
+ return -1;
+
+ cs_size = ddr4_cs_size(cs_mode);
+ } else if (pvt->dram_type == MEM_LRDDR3) {
+ unsigned rank_multiply = dcsm & 0xf;
+
+ if (rank_multiply == 3)
+ rank_multiply = 4;
+ cs_size = ddr3_lrdimm_cs_size(cs_mode, rank_multiply);
+ } else {
+ /* Minimum cs size is 512mb for F15hM60h*/
+ if (cs_mode == 0x1)
+ return -1;
+
+ cs_size = ddr3_cs_size(cs_mode, false);
+ }
+
+ return cs_size;
+}
+
/*
* F16h and F15h model 30h have only limited cs_modes.
*/
static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);

@@ -1757,13 +1868,20 @@ static void debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)

size0 = 0;
if (dcsb[dimm*2] & DCSB_CS_ENABLE)
+ /* For f15m60h, need multiplier for LRDIMM cs_size
+ * calculation. We pass 'dimm' value to the dbam_to_cs
+ * mapper so we can find the multiplier from the
+ * corresponding DCSM.
+ */
size0 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);

size1 = 0;
if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
size1 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);

amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
dimm * 2, size0,
@@ -1780,6 +1898,7 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = k8_early_channel_count,
.map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
.dbam_to_cs = k8_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_k8,
}
},
[F10_CPUS] = {
@@ -1790,6 +1909,7 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = f1x_early_channel_count,
.map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f10_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f10,
}
},
[F15_CPUS] = {
@@ -1800,6 +1920,7 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = f1x_early_channel_count,
.map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f15_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f15,
}
},
[F15_M30H_CPUS] = {
@@ -1810,6 +1931,18 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = f1x_early_channel_count,
.map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f16_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f15,
+ }
+ },
+ [F15_M60H_CPUS] = {
+ .ctl_name = "F15h_M60h",
+ .f1_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1,
+ .f3_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F3,
+ .ops = {
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
+ .dbam_to_cs = f15_m60h_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f15,
}
},
[F16_CPUS] = {
@@ -1820,6 +1953,7 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = f1x_early_channel_count,
.map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f16_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f16,
}
},
[F16_M30H_CPUS] = {
@@ -1830,6 +1964,7 @@ static struct amd64_family_type family_types[] = {
.early_channel_count = f1x_early_channel_count,
.map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f16_dbam_to_chip_select,
+ .determine_memory_type = determine_memory_type_f16,
}
},
};
@@ -2175,6 +2310,8 @@ static void read_mc_regs(struct amd64_pvt *pvt)
}

pvt->ecc_sym_sz = 4;
+ pvt->ops->determine_memory_type(pvt);
+ edac_dbg(1, " DIMM type: %s\n", edac_mem_types[pvt->dram_type]);

if (pvt->fam >= 0x10) {
amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
@@ -2238,7 +2375,8 @@ static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr)
*/
cs_mode = DBAM_DIMM(csrow_nr / 2, dbam);

- nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, (csrow_nr / 2))
+ << (20 - PAGE_SHIFT);

edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
csrow_nr, dct, cs_mode);
@@ -2257,7 +2395,6 @@ static int init_csrows(struct mem_ctl_info *mci)
struct csrow_info *csrow;
struct dimm_info *dimm;
enum edac_type edac_mode;
- enum mem_type mtype;
int i, j, empty = 1;
int nr_pages = 0;
u32 val;
@@ -2302,8 +2439,6 @@ static int init_csrows(struct mem_ctl_info *mci)
nr_pages += row_dct1_pages;
}

- mtype = determine_memory_type(pvt, i);
-
edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);

/*
@@ -2317,7 +2452,7 @@ static int init_csrows(struct mem_ctl_info *mci)

for (j = 0; j < pvt->channel_count; j++) {
dimm = csrow->channels[j]->dimm;
- dimm->mtype = mtype;
+ dimm->mtype = pvt->dram_type;
dimm->edac_mode = edac_mode;
}
}
@@ -2604,6 +2739,10 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
fam_type = &family_types[F15_M30H_CPUS];
pvt->ops = &family_types[F15_M30H_CPUS].ops;
break;
+ } else if (pvt->model == 0x60) {
+ fam_type = &family_types[F15_M60H_CPUS];
+ pvt->ops = &family_types[F15_M60H_CPUS].ops;
+ break;
}

fam_type = &family_types[F15_CPUS];
@@ -2828,55 +2967,13 @@ static void remove_one_instance(struct pci_dev *pdev)
* inquiry this table to see if this driver is for a given device found.
*/
static const struct pci_device_id amd64_pci_table[] = {
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
-
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F2) },
{0, }
};
MODULE_DEVICE_TABLE(pci, amd64_pci_table);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 55fb594..8bdc805 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -162,10 +162,12 @@
/*
* PCI-defined configuration space registers
*/
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
@@ -221,6 +223,8 @@

#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)

+#define DRAM_CONTROL 0x78
+
#define DBAM0 0x80
#define DBAM1 0x180

@@ -301,6 +305,7 @@ enum amd_families {
F10_CPUS,
F15_CPUS,
F15_M30H_CPUS,
+ F15_M60H_CPUS,
F16_CPUS,
F16_M30H_CPUS,
NUM_FAMILIES,
@@ -379,6 +384,9 @@ struct amd64_pvt {

/* place to store error injection parameters prior to issue */
struct error_injection injection;
+
+ /* cache the dram_type */
+ enum mem_type dram_type;
};

enum err_codes {
@@ -480,7 +488,9 @@ struct low_ops {
int (*early_channel_count) (struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
struct err_info *);
- int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
+ int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr);
+ void (*determine_memory_type) (struct amd64_pvt *pvt);
};

struct amd64_family_type {
--
2.0.2
Borislav Petkov
2014-10-10 17:49:54 UTC
Permalink
Post by Aravind Gopalakrishnan
This patch adds support for ECC error decoding for F15h M60h processor.
Aside from the usual changes, the patch adds support for some new features
- DDR4(unbuffered, registered); LRDIMM DDR3 support
- relevant debug messages have been modified/added to report these
memory types
- new dbam_to_cs mappers
- if (F15h M60h && LRDIMM); we need a 'multiplier' value to find
cs_size. This multiplier value is obtained from the per-dimm
DCSM register. So, change the interface to accept a 'cs_mask_nr'
value to facilitate this calculation
- new determine_memory_type low_ops
- introduced to remove too many if-else conditions in
determine_memory_type().
- This is now called early in read_mc_regs() to cache dram_type
- amd64_pci_table[] is condensed by using PCI_VDEVICE macro.
Tested the patch by injecting 'ECC' type errors using mce_amd_inj
and error decoding works fine.
---
Changes in V2
- Cache dram_type in amd64_pvt structure (per Boris suggestion)
- Introduce per-family low_ops for determine_memory_type() to reduce
number of if-else statements
- Call this early in read_mc_regs() to cache dram_type
- The debug messages are moved around a bit as a result to print
dram_type immediately
drivers/edac/amd64_edac.c | 253 ++++++++++++++++++++++++++++++++--------------
drivers/edac/amd64_edac.h | 16 ++-
2 files changed, 188 insertions(+), 81 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index bbd6514..6cc3243 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -692,9 +692,18 @@ static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
{
edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr);
- edac_dbg(1, " DIMM type: %sbuffered; all DIMMs support ECC: %s\n",
- (dclr & BIT(16)) ? "un" : "",
- (dclr & BIT(19)) ? "yes" : "no");
+ if (pvt->dram_type == MEM_LRDDR3) {
+ u32 dcsm = pvt->csels[chan].csmasks[0];
+ /*
+ * It's assumed all LRDIMMs in a DCT are going to be of
+ * same 'type' until proven otherwise. So, use a cs
+ * value of '0' here to get dcsm value.
+ */
+ edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
+ }
+
+ edac_dbg(1, "All DIMMs support ECC:%s\n",
+ (dclr & BIT(19)) ? "yes" : "no");
edac_dbg(1, " PAR/ERR parity: %s\n",
(dclr & BIT(8)) ? "enabled" : "disabled");
@@ -756,7 +765,7 @@ static void prep_chip_selects(struct amd64_pvt *pvt)
if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
- } else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ } else if (pvt->fam == 0x15 && pvt->model == 0x30) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
} else {
@@ -813,25 +822,57 @@ static void read_dct_base_mask(struct amd64_pvt *pvt)
}
}
-static enum mem_type determine_memory_type(struct amd64_pvt *pvt, int cs)
+void determine_memory_type_k8(struct amd64_pvt *pvt)
{
- enum mem_type type;
-
- /* F15h supports only DDR3 */
- if (pvt->fam >= 0x15)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
- else if (pvt->fam == 0x10 || pvt->ext_model >= K8_REV_F) {
+ if (pvt->ext_model >= K8_REV_F) {
if (pvt->dchr0 & DDR3_MODE)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR3 : MEM_RDDR3;
else
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR2 : MEM_RDDR2;
If you want to do separate ->determine_memory_type() per family, you can
at least avoid code duplication here above ^^^ by doing

return determine_memory_type_f10(pvt);

for the K8-revF and later at least.

Or, you can do a nice clean switch/case and keep the logic for the
memory type in one function. See which one looks cleaner but from where
I'm standing, the per-family pointers are a bit too much for this case,
IMHO.

Oh, btw, they all should be static declarations, of course.
Post by Aravind Gopalakrishnan
} else {
- type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+ pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
}
+}
- amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
+void determine_memory_type_f10(struct amd64_pvt *pvt)
+{
+ if (pvt->dchr0 & DDR3_MODE)
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR3 : MEM_RDDR3;
+ else
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ?
+ MEM_DDR2 : MEM_RDDR2;
+}
- return type;
+void determine_memory_type_f15(struct amd64_pvt *pvt)
+{
+ if (pvt->model == 0x60) {
+ /*
+ * We use a Chip Select value of '0' to obtain dcsm.
+ * Theoretically, it is possible to populate LRDIMMs
+ * of different 'Rank' value on a DCT. But this is
+ * not a common case. So, it's reasonable to assume
+ * all DIMMs are going to be of same 'type' until
+ * proven otherwise.
+ */
+ u32 dram_ctrl;
+ u32 dcsm = pvt->csels[0].csmasks[0];
+
+ amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL,
+ &dram_ctrl);
+ (dcsm & 0x3) ? MEM_LRDDR3 : MEM_RDDR3;
This is pretty unreadable, please do a simpler if-else instead.
Post by Aravind Gopalakrishnan
+ } else {
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ }
+}
+
+void determine_memory_type_f16(struct amd64_pvt *pvt)
+{
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
This line tends to repeat a lot - the switch/case version starts to
sound much better all of a sudden... :-)

Thanks.
--
Regards/Gruss,
Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
Loading...