Discussion:
[PATCH v10 0/4] APM X-Gene PCIe host controller
Tanmay Inamdar
2014-09-26 21:08:23 UTC
Permalink
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.

X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/23/852

If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.

changes since V9:
1. Remove 'xgene_pcie_fixup_bridge' and hide the bridge BAR0 and BAR1 by
faking bridge's config space read and write to BAR0 and BAR1.
2. Remove whitespace and fit in one line.
3. Follow usual block comment.
4. user '%pR' for printing out resource info
5. Add device and vendor ID programming to make driver operable with older
firmware.

changes since V8:
1. Add 'dma-coherent' attribute in device node.

changes since V7:
1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.

changes since V6:
1. Port driver to changed interface as per Liviu's v10 series.

changes since V5:
1. Port driver to changed interface of 'of_create_pci_host_bridge'
2. Fix the prefetch bit setting
3. Removed bunch of register programming which is already done by firmware

changes since V4:
1. fix section mismatch warnings
2. fix the patch description
3. fix indentation
4. update read/write cfg functions by passing both addr and offset.
5. use 'time_before' for timeout.
6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
7. remove BUG_ON for pci_ioremap_io.

changes since V3:
1. remove 'struct hw_pci' and supporting ops in hw_pci
2. add code to create the host bridge from dts
3. add code to scan the the host bridge
4. modify outbound windows setup function to get resource information from
'bridge->windows'
5. add compatible string in pcie dts node with current X-Gene SOC name.

changes since V2:
1. redefined each PCI port in different PCI domain correctly.
2. removed setup_lane and setup_link functions from driver.
3. removed scan_bus wrapper and set_primary_bus hack.
4. added pci_ioremap_io for io resources.

changes since V1:
1. added PCI domain support
2. reading cpu and pci addresses from device tree to configure regions.
3. got rid of unnecessary wrappers for readl and writel.
4. got rid of endpoint configuration code.
5. added 'dma-ranges' property support to read inbound region configuration.
6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
7. dropped 'clock-names' property from bindings
8. added comments whereever requested.

Tanmay Inamdar (4):
pci:host: APM X-Gene PCIe host controller driver
arm64: dts: APM X-Gene PCIe device tree nodes
dt-bindings: pci: xgene pcie device tree bindings
MAINTAINERS: entry for APM X-Gene PCIe host driver

.../devicetree/bindings/pci/xgene-pci.txt | 57 ++
MAINTAINERS | 8 +
arch/arm64/boot/dts/apm-mustang.dts | 8 +
arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-xgene.c | 659 +++++++++++++++++++++
7 files changed, 908 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
create mode 100644 drivers/pci/host/pci-xgene.c
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tanmay Inamdar
2014-09-26 21:08:24 UTC
Permalink
This patch adds the AppliedMicro X-Gene SOC PCIe host controller driver.
X-Gene PCIe controller supports maximum up to 8 lanes and GEN3 speed.
X-Gene SOC supports maximum 5 PCIe ports.

Reviewed-by: Liviu Dudau <***@arm.com>
Tested-by: Ming Lei <***@canonical.com>
Tested-by: Dann Frazier <***@canonical.com>
Signed-off-by: Tanmay Inamdar <***@apm.com>
---
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-xgene.c | 659 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 670 insertions(+)
create mode 100644 drivers/pci/host/pci-xgene.c

diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 90f5cca..382fd3d 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -63,4 +63,14 @@ config PCIE_SPEAR13XX
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.

+config PCI_XGENE
+ bool "X-Gene PCIe controller"
+ depends on ARCH_XGENE
+ depends on OF
+ select PCIEPORTBUS
+ help
+ Say Y here if you want internal PCI support on APM X-Gene SoC.
+ There are 5 internal PCIe ports available. Each port is GEN3 capable
+ and have varied lanes from x1 to x8.
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index d0e88f1..845611f 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
new file mode 100644
index 0000000..41c76b8
--- /dev/null
+++ b/drivers/pci/host/pci-xgene.c
@@ -0,0 +1,659 @@
+/**
+ * APM X-Gene PCIe Driver
+ *
+ * Copyright (c) 2014 Applied Micro Circuits Corporation.
+ *
+ * Author: Tanmay Inamdar <***@apm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk-private.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PCIECORE_CTLANDSTATUS 0x50
+#define PIM1_1L 0x80
+#define IBAR2 0x98
+#define IR2MSK 0x9c
+#define PIM2_1L 0xa0
+#define IBAR3L 0xb4
+#define IR3MSKL 0xbc
+#define PIM3_1L 0xc4
+#define OMR1BARL 0x100
+#define OMR2BARL 0x118
+#define OMR3BARL 0x130
+#define CFGBARL 0x154
+#define CFGBARH 0x158
+#define CFGCTL 0x15c
+#define RTDID 0x160
+#define BRIDGE_CFG_0 0x2000
+#define BRIDGE_CFG_4 0x2010
+#define BRIDGE_STATUS_0 0x2600
+
+#define LINK_UP_MASK 0x00000100
+#define AXI_EP_CFG_ACCESS 0x10000
+#define EN_COHERENCY 0xF0000000
+#define EN_REG 0x00000001
+#define OB_LO_IO 0x00000002
+#define XGENE_PCIE_VENDORID 0x10E8
+#define XGENE_PCIE_DEVICEID 0xE004
+#define SZ_1T (SZ_1G*1024ULL)
+#define PIPE_PHY_RATE_RD(src) ((0xc000 & (u32)(src)) >> 0xe)
+
+struct xgene_pcie_port {
+ struct device_node *node;
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *csr_base;
+ void __iomem *cfg_base;
+ unsigned long cfg_addr;
+ bool link_up;
+};
+
+static inline u32 pcie_bar_low_val(u32 addr, u32 flags)
+{
+ return (addr & PCI_BASE_ADDRESS_MEM_MASK) | flags;
+}
+
+/* PCIE Configuration Out/In */
+static inline void xgene_pcie_cfg_out32(void __iomem *addr, int offset, u32 val)
+{
+ writel(val, addr + offset);
+}
+
+static inline void xgene_pcie_cfg_out16(void __iomem *addr, int offset, u16 val)
+{
+ u32 val32 = readl(addr + (offset & ~0x3));
+
+ switch (offset & 0x3) {
+ case 2:
+ val32 &= ~0xFFFF0000;
+ val32 |= (u32)val << 16;
+ break;
+ case 0:
+ default:
+ val32 &= ~0xFFFF;
+ val32 |= val;
+ break;
+ }
+ writel(val32, addr + (offset & ~0x3));
+}
+
+static inline void xgene_pcie_cfg_out8(void __iomem *addr, int offset, u8 val)
+{
+ u32 val32 = readl(addr + (offset & ~0x3));
+
+ switch (offset & 0x3) {
+ case 0:
+ val32 &= ~0xFF;
+ val32 |= val;
+ break;
+ case 1:
+ val32 &= ~0xFF00;
+ val32 |= (u32)val << 8;
+ break;
+ case 2:
+ val32 &= ~0xFF0000;
+ val32 |= (u32)val << 16;
+ break;
+ case 3:
+ default:
+ val32 &= ~0xFF000000;
+ val32 |= (u32)val << 24;
+ break;
+ }
+ writel(val32, addr + (offset & ~0x3));
+}
+
+static inline void xgene_pcie_cfg_in32(void __iomem *addr, int offset, u32 *val)
+{
+ *val = readl(addr + offset);
+}
+
+static inline void xgene_pcie_cfg_in16(void __iomem *addr, int offset, u32 *val)
+{
+ *val = readl(addr + (offset & ~0x3));
+
+ switch (offset & 0x3) {
+ case 2:
+ *val >>= 16;
+ break;
+ }
+
+ *val &= 0xFFFF;
+}
+
+static inline void xgene_pcie_cfg_in8(void __iomem *addr, int offset, u32 *val)
+{
+ *val = readl(addr + (offset & ~0x3));
+
+ switch (offset & 0x3) {
+ case 3:
+ *val = *val >> 24;
+ break;
+ case 2:
+ *val = *val >> 16;
+ break;
+ case 1:
+ *val = *val >> 8;
+ break;
+ }
+ *val &= 0xFF;
+}
+
+/*
+ * When the address bit [17:16] is 2'b01, the Configuration access will be
+ * treated as Type 1 and it will be forwarded to external PCIe device.
+ */
+static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
+{
+ struct xgene_pcie_port *port = bus->sysdata;
+
+ if (bus->number >= (bus->primary + 1))
+ return port->cfg_base + AXI_EP_CFG_ACCESS;
+
+ return port->cfg_base;
+}
+
+/*
+ * For Configuration request, RTDID register is used as Bus Number,
+ * Device Number and Function number of the header fields.
+ */
+static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
+{
+ struct xgene_pcie_port *port = bus->sysdata;
+ unsigned int b, d, f;
+ u32 rtdid_val = 0;
+
+ b = bus->number;
+ d = PCI_SLOT(devfn);
+ f = PCI_FUNC(devfn);
+
+ if (!pci_is_root_bus(bus))
+ rtdid_val = (b << 8) | (d << 3) | f;
+
+ writel(rtdid_val, port->csr_base + RTDID);
+ /* read the register back to ensure flush */
+ readl(port->csr_base + RTDID);
+}
+
+/*
+ * X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
+ * the translation between PCI bus to native BUS. Entire DDR region
+ * is mapped on to PCIe space using these registers, so that it is
+ * accessible for EP devices for DMA. The BAR0/1 of bridge should be
+ * hidden during enumeration to avoid the sizing and resource allocation
+ * by PCIe core.
+ */
+static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
+{
+ if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
+ (offset == PCI_BASE_ADDRESS_1)))
+ return true;
+
+ return false;
+}
+
+static int xgene_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct xgene_pcie_port *port = bus->sysdata;
+ void __iomem *addr;
+
+ if ((pci_is_root_bus(bus) && devfn != 0) || !port->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (xgene_pcie_hide_rc_bars(bus, offset)) {
+ *val = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+ addr = xgene_pcie_get_cfg_base(bus);
+ switch (len) {
+ case 1:
+ xgene_pcie_cfg_in8(addr, offset, val);
+ break;
+ case 2:
+ xgene_pcie_cfg_in16(addr, offset, val);
+ break;
+ default:
+ xgene_pcie_cfg_in32(addr, offset, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int xgene_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct xgene_pcie_port *port = bus->sysdata;
+ void __iomem *addr;
+
+ if ((pci_is_root_bus(bus) && devfn != 0) || !port->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (xgene_pcie_hide_rc_bars(bus, offset))
+ return PCIBIOS_SUCCESSFUL;
+
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+ addr = xgene_pcie_get_cfg_base(bus);
+ switch (len) {
+ case 1:
+ xgene_pcie_cfg_out8(addr, offset, (u8)val);
+ break;
+ case 2:
+ xgene_pcie_cfg_out16(addr, offset, (u16)val);
+ break;
+ default:
+ xgene_pcie_cfg_out32(addr, offset, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops xgene_pcie_ops = {
+ .read = xgene_pcie_read_config,
+ .write = xgene_pcie_write_config
+};
+
+static u64 xgene_pcie_set_ib_mask(void __iomem *csr_base, u32 addr,
+ u32 flags, u64 size)
+{
+ u64 mask = (~(size - 1) & PCI_BASE_ADDRESS_MEM_MASK) | flags;
+ u32 val32 = 0;
+ u32 val;
+
+ val32 = readl(csr_base + addr);
+ val = (val32 & 0x0000ffff) | (lower_32_bits(mask) << 16);
+ writel(val, csr_base + addr);
+
+ val32 = readl(csr_base + addr + 0x04);
+ val = (val32 & 0xffff0000) | (lower_32_bits(mask) >> 16);
+ writel(val, csr_base + addr + 0x04);
+
+ val32 = readl(csr_base + addr + 0x04);
+ val = (val32 & 0x0000ffff) | (upper_32_bits(mask) << 16);
+ writel(val, csr_base + addr + 0x04);
+
+ val32 = readl(csr_base + addr + 0x08);
+ val = (val32 & 0xffff0000) | (upper_32_bits(mask) >> 16);
+ writel(val, csr_base + addr + 0x08);
+
+ return mask;
+}
+
+static void xgene_pcie_linkup(struct xgene_pcie_port *port,
+ u32 *lanes, u32 *speed)
+{
+ void __iomem *csr_base = port->csr_base;
+ u32 val32;
+
+ port->link_up = false;
+ val32 = readl(csr_base + PCIECORE_CTLANDSTATUS);
+ if (val32 & LINK_UP_MASK) {
+ port->link_up = true;
+ *speed = PIPE_PHY_RATE_RD(val32);
+ val32 = readl(csr_base + BRIDGE_STATUS_0);
+ *lanes = val32 >> 26;
+ }
+}
+
+static int xgene_pcie_init_port(struct xgene_pcie_port *port)
+{
+ int rc;
+
+ port->clk = clk_get(port->dev, NULL);
+ if (IS_ERR(port->clk)) {
+ dev_err(port->dev, "clock not available\n");
+ return -ENODEV;
+ }
+
+ rc = clk_prepare_enable(port->clk);
+ if (rc) {
+ dev_err(port->dev, "clock enable failed\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static int xgene_pcie_map_reg(struct xgene_pcie_port *port,
+ struct platform_device *pdev)
+{
+ struct resource *res;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
+ port->csr_base = devm_ioremap_resource(port->dev, res);
+ if (IS_ERR(port->csr_base))
+ return PTR_ERR(port->csr_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ port->cfg_base = devm_ioremap_resource(port->dev, res);
+ if (IS_ERR(port->cfg_base))
+ return PTR_ERR(port->cfg_base);
+ port->cfg_addr = res->start;
+
+ return 0;
+}
+
+static void xgene_pcie_setup_ob_reg(struct xgene_pcie_port *port,
+ struct resource *res, u32 offset,
+ u64 cpu_addr, u64 pci_addr)
+{
+ void __iomem *base = port->csr_base + offset;
+ resource_size_t size = resource_size(res);
+ u64 restype = resource_type(res);
+ u64 mask = 0;
+ u32 min_size;
+ u32 flag = EN_REG;
+
+ if (restype == IORESOURCE_MEM) {
+ min_size = SZ_128M;
+ } else {
+ min_size = 128;
+ flag |= OB_LO_IO;
+ }
+
+ if (size >= min_size)
+ mask = ~(size - 1) | flag;
+ else
+ dev_warn(port->dev, "res size 0x%llx less than minimum 0x%x\n",
+ (u64)size, min_size);
+
+ writel(lower_32_bits(cpu_addr), base);
+ writel(upper_32_bits(cpu_addr), base + 0x04);
+ writel(lower_32_bits(mask), base + 0x08);
+ writel(upper_32_bits(mask), base + 0x0c);
+ writel(lower_32_bits(pci_addr), base + 0x10);
+ writel(upper_32_bits(pci_addr), base + 0x14);
+}
+
+static void xgene_pcie_setup_cfg_reg(void __iomem *csr_base, u64 addr)
+{
+ writel(lower_32_bits(addr), csr_base + CFGBARL);
+ writel(upper_32_bits(addr), csr_base + CFGBARH);
+ writel(EN_REG, csr_base + CFGCTL);
+}
+
+static int xgene_pcie_map_ranges(struct xgene_pcie_port *port,
+ struct list_head *res,
+ resource_size_t io_base)
+{
+ struct pci_host_bridge_window *window;
+ struct device *dev = port->dev;
+ int ret;
+
+ list_for_each_entry(window, res, list) {
+ struct resource *res = window->res;
+ u64 restype = resource_type(res);
+
+ dev_dbg(port->dev, "%pR\n", res);
+
+ switch (restype) {
+ case IORESOURCE_IO:
+ xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base,
+ res->start - window->offset);
+ ret = pci_remap_iospace(res, io_base);
+ if (ret < 0)
+ return ret;
+ break;
+ case IORESOURCE_MEM:
+ xgene_pcie_setup_ob_reg(port, res, OMR1BARL, res->start,
+ res->start - window->offset);
+ break;
+ case IORESOURCE_BUS:
+ break;
+ default:
+ dev_err(dev, "invalid io resource - %pR\n", res);
+ return -EINVAL;
+ }
+ }
+ xgene_pcie_setup_cfg_reg(port->csr_base, port->cfg_addr);
+
+ return 0;
+}
+
+static void xgene_pcie_setup_pims(void *addr, u64 pim, u64 size)
+{
+ writel(lower_32_bits(pim), addr);
+ writel(upper_32_bits(pim) | EN_COHERENCY, addr + 0x04);
+ writel(lower_32_bits(size), addr + 0x10);
+ writel(upper_32_bits(size), addr + 0x14);
+}
+
+/*
+ * X-Gene PCIe support maximum 3 inbound memory regions
+ * This function helps to select a region based on size of region
+ */
+static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
+{
+ if ((size > 4) && (size < SZ_16M) && !(*ib_reg_mask & (1 << 1))) {
+ *ib_reg_mask |= (1 << 1);
+ return 1;
+ }
+
+ if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
+ *ib_reg_mask |= (1 << 0);
+ return 0;
+ }
+
+ if ((size > SZ_1M) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 2))) {
+ *ib_reg_mask |= (1 << 2);
+ return 2;
+ }
+
+ return -EINVAL;
+}
+
+static void xgene_pcie_setup_ib_reg(struct xgene_pcie_port *port,
+ struct of_pci_range *range, u8 *ib_reg_mask)
+{
+ void __iomem *csr_base = port->csr_base;
+ void __iomem *cfg_base = port->cfg_base;
+ void *bar_addr;
+ void *pim_addr;
+ u64 cpu_addr = range->cpu_addr;
+ u64 pci_addr = range->pci_addr;
+ u64 size = range->size;
+ u64 mask = ~(size - 1) | EN_REG;
+ u32 flags = PCI_BASE_ADDRESS_MEM_TYPE_64;
+ u32 bar_low;
+ int region;
+
+ region = xgene_pcie_select_ib_reg(ib_reg_mask, range->size);
+ if (region < 0) {
+ dev_warn(port->dev, "invalid pcie dma-range config\n");
+ return;
+ }
+
+ if (range->flags & IORESOURCE_PREFETCH)
+ flags |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+ bar_low = pcie_bar_low_val((u32)cpu_addr, flags);
+ switch (region) {
+ case 0:
+ xgene_pcie_set_ib_mask(csr_base, BRIDGE_CFG_4, flags, size);
+ bar_addr = cfg_base + PCI_BASE_ADDRESS_0;
+ writel(bar_low, bar_addr);
+ writel(upper_32_bits(cpu_addr), bar_addr + 0x4);
+ pim_addr = csr_base + PIM1_1L;
+ break;
+ case 1:
+ bar_addr = csr_base + IBAR2;
+ writel(bar_low, bar_addr);
+ writel(lower_32_bits(mask), csr_base + IR2MSK);
+ pim_addr = csr_base + PIM2_1L;
+ break;
+ case 2:
+ bar_addr = csr_base + IBAR3L;
+ writel(bar_low, bar_addr);
+ writel(upper_32_bits(cpu_addr), bar_addr + 0x4);
+ writel(lower_32_bits(mask), csr_base + IR3MSKL);
+ writel(upper_32_bits(mask), csr_base + IR3MSKL + 0x4);
+ pim_addr = csr_base + PIM3_1L;
+ break;
+ }
+
+ xgene_pcie_setup_pims(pim_addr, pci_addr, ~(size - 1));
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+ struct device_node *node)
+{
+ const int na = 3, ns = 2;
+ int rlen;
+
+ parser->node = node;
+ parser->pna = of_n_addr_cells(node);
+ parser->np = parser->pna + na + ns;
+
+ parser->range = of_get_property(node, "dma-ranges", &rlen);
+ if (!parser->range)
+ return -ENOENT;
+ parser->end = parser->range + rlen / sizeof(__be32);
+
+ return 0;
+}
+
+static int xgene_pcie_parse_map_dma_ranges(struct xgene_pcie_port *port)
+{
+ struct device_node *np = port->node;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ struct device *dev = port->dev;
+ u8 ib_reg_mask = 0;
+
+ if (pci_dma_range_parser_init(&parser, np)) {
+ dev_err(dev, "missing dma-ranges property\n");
+ return -EINVAL;
+ }
+
+ /* Get the dma-ranges from DT */
+ for_each_of_pci_range(&parser, &range) {
+ u64 end = range.cpu_addr + range.size - 1;
+
+ dev_dbg(port->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
+ range.flags, range.cpu_addr, end, range.pci_addr);
+ xgene_pcie_setup_ib_reg(port, &range, &ib_reg_mask);
+ }
+ return 0;
+}
+
+/* clear bar configuration which was done by firmware */
+static void xgene_pcie_clear_config(struct xgene_pcie_port *port)
+{
+ int i;
+
+ for (i = PIM1_1L; i <= CFGCTL; i += 4)
+ writel(0x0, port->csr_base + i);
+}
+
+static int xgene_pcie_setup(struct xgene_pcie_port *port,
+ struct list_head *res,
+ resource_size_t io_base)
+{
+ u32 val, lanes = 0, speed = 0;
+ int ret;
+
+ xgene_pcie_clear_config(port);
+
+ /* setup the vendor and device IDs correctly */
+ val = (XGENE_PCIE_DEVICEID << 16) | XGENE_PCIE_VENDORID;
+ writel(val, port->csr_base + BRIDGE_CFG_0);
+
+ ret = xgene_pcie_map_ranges(port, res, io_base);
+ if (ret)
+ return ret;
+
+ ret = xgene_pcie_parse_map_dma_ranges(port);
+ if (ret)
+ return ret;
+
+ xgene_pcie_linkup(port, &lanes, &speed);
+ if (!port->link_up)
+ dev_info(port->dev, "(rc) link down\n");
+ else
+ dev_info(port->dev, "(rc) x%d gen-%d link up\n",
+ lanes, speed + 1);
+ return 0;
+}
+
+static int xgene_pcie_probe_bridge(struct platform_device *pdev)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ struct xgene_pcie_port *port;
+ resource_size_t iobase = 0;
+ struct pci_bus *bus;
+ int ret;
+ LIST_HEAD(res);
+
+ port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+ port->node = of_node_get(pdev->dev.of_node);
+ port->dev = &pdev->dev;
+
+ ret = xgene_pcie_map_reg(port, pdev);
+ if (ret)
+ return ret;
+
+ ret = xgene_pcie_init_port(port);
+ if (ret)
+ return ret;
+
+ ret = of_pci_get_host_bridge_resources(dn, 0, 0xff, &res, &iobase);
+ if (ret)
+ return ret;
+
+ ret = xgene_pcie_setup(port, &res, iobase);
+ if (ret)
+ return ret;
+
+ bus = pci_scan_root_bus(&pdev->dev, 0, &xgene_pcie_ops, port, &res);
+ if (!bus)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, port);
+ return 0;
+}
+
+static const struct of_device_id xgene_pcie_match_table[] = {
+ {.compatible = "apm,xgene-pcie",},
+ {},
+};
+
+static struct platform_driver xgene_pcie_driver = {
+ .driver = {
+ .name = "xgene-pcie",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(xgene_pcie_match_table),
+ },
+ .probe = xgene_pcie_probe_bridge,
+};
+module_platform_driver(xgene_pcie_driver);
+
+MODULE_AUTHOR("Tanmay Inamdar <***@apm.com>");
+MODULE_DESCRIPTION("APM X-Gene PCIe driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Tanmay Inamdar
2014-09-26 21:08:26 UTC
Permalink
This patch adds the bindings for X-Gene PCIe driver. The driver resides
under 'drivers/pci/host/pci-xgene.c' file.

Signed-off-by: Tanmay Inamdar <***@apm.com>
---
.../devicetree/bindings/pci/xgene-pci.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt

diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
new file mode 100644
index 0000000..1070b06
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -0,0 +1,57 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "apm,xgene-pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+ registers. Must contain an entry for each entry in the reg-names
+ property.
+- reg-names: Must include the following entries:
+ "csr": controller configuration registers.
+ "cfg": pcie configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCIe interface to interrupt
+ numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+
+SoC specific DT Entry:
+
+ pcie0: ***@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
+
+Board specific DT Entry:
+ &pcie0 {
+ status = "ok";
+ };
--
1.9.1
Tanmay Inamdar
2014-09-26 21:08:27 UTC
Permalink
Add entry for AppliedMicro X-Gene PCIe host driver.

Signed-off-by: Tanmay Inamdar <***@apm.com>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 670b3dc..b18bc49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6942,6 +6942,14 @@ L: linux-***@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*

+PCI DRIVER FOR APPLIEDMICRO XGENE
+M: Tanmay Inamdar <***@apm.com>
+L: linux-***@vger.kernel.org
+L: linux-arm-***@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/xgene-pci.txt
+F: drivers/pci/host/pci-xgene.c
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-***@lists.infradead.org
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tanmay Inamdar
2014-09-26 21:08:25 UTC
Permalink
This patch adds the device tree nodes for APM X-Gene PCIe host controller and
PCIe clock interface. Since X-Gene SOC supports maximum 5 ports, 5 dts
nodes are added.

Signed-off-by: Tanmay Inamdar <***@apm.com>
---
arch/arm64/boot/dts/apm-mustang.dts | 8 ++
arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++++++++++++++++++++++++++++++++
2 files changed, 173 insertions(+)

diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts
index b2f5622..f649000 100644
--- a/arch/arm64/boot/dts/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm-mustang.dts
@@ -25,6 +25,14 @@
};
};

+&pcie0clk {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
&serial0 {
status = "ok";
};
diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index c0aceef..403197a 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -269,6 +269,171 @@
enable-mask = <0x2>;
clock-output-names = "rtcclk";
};
+
+ pcie0clk: ***@1f2bc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ pcie1clk: ***@1f2cc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2cc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie1clk";
+ };
+
+ pcie2clk: ***@1f2dc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2dc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie2clk";
+ };
+
+ pcie3clk: ***@1f50c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f50c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie3clk";
+ };
+
+ pcie4clk: ***@1f51c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f51c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie4clk";
+ };
+ };
+
+ pcie0: ***@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
+ pcie1: ***@1f2c0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
+ 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+ dma-coherent;
+ clocks = <&pcie1clk 0>;
+ };
+
+ pcie2: ***@1f2d0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
+ 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+ dma-coherent;
+ clocks = <&pcie2clk 0>;
+ };
+
+ pcie3: ***@1f500000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
+ 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+ dma-coherent;
+ clocks = <&pcie3clk 0>;
+ };
+
+ pcie4: ***@1f510000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
+ 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+ dma-coherent;
+ clocks = <&pcie4clk 0>;
};

serial0: ***@1c020000 {
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas
2014-10-01 19:14:03 UTC
Permalink
Post by Tanmay Inamdar
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.
X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/23/852
If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.
I applied these on pci/host-xgene (based on pci/host-generic). I hope to
merge these for v3.18. It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.
Post by Tanmay Inamdar
1. Remove 'xgene_pcie_fixup_bridge' and hide the bridge BAR0 and BAR1 by
faking bridge's config space read and write to BAR0 and BAR1.
2. Remove whitespace and fit in one line.
3. Follow usual block comment.
4. user '%pR' for printing out resource info
5. Add device and vendor ID programming to make driver operable with older
firmware.
1. Add 'dma-coherent' attribute in device node.
1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.
1. Port driver to changed interface as per Liviu's v10 series.
1. Port driver to changed interface of 'of_create_pci_host_bridge'
2. Fix the prefetch bit setting
3. Removed bunch of register programming which is already done by firmware
1. fix section mismatch warnings
2. fix the patch description
3. fix indentation
4. update read/write cfg functions by passing both addr and offset.
5. use 'time_before' for timeout.
6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
7. remove BUG_ON for pci_ioremap_io.
1. remove 'struct hw_pci' and supporting ops in hw_pci
2. add code to create the host bridge from dts
3. add code to scan the the host bridge
4. modify outbound windows setup function to get resource information from
'bridge->windows'
5. add compatible string in pcie dts node with current X-Gene SOC name.
1. redefined each PCI port in different PCI domain correctly.
2. removed setup_lane and setup_link functions from driver.
3. removed scan_bus wrapper and set_primary_bus hack.
4. added pci_ioremap_io for io resources.
1. added PCI domain support
2. reading cpu and pci addresses from device tree to configure regions.
3. got rid of unnecessary wrappers for readl and writel.
4. got rid of endpoint configuration code.
5. added 'dma-ranges' property support to read inbound region configuration.
6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
7. dropped 'clock-names' property from bindings
8. added comments whereever requested.
pci:host: APM X-Gene PCIe host controller driver
arm64: dts: APM X-Gene PCIe device tree nodes
dt-bindings: pci: xgene pcie device tree bindings
MAINTAINERS: entry for APM X-Gene PCIe host driver
.../devicetree/bindings/pci/xgene-pci.txt | 57 ++
MAINTAINERS | 8 +
arch/arm64/boot/dts/apm-mustang.dts | 8 +
arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++
drivers/pci/host/Kconfig | 10 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-xgene.c | 659 +++++++++++++++++++++
7 files changed, 908 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
create mode 100644 drivers/pci/host/pci-xgene.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Arnd Bergmann
2014-10-02 12:20:49 UTC
Permalink
Post by Bjorn Helgaas
Post by Tanmay Inamdar
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.
X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/23/852
If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.
I applied these on pci/host-xgene (based on pci/host-generic). I hope to
merge these for v3.18. It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.
Those changes should normally go through the arm-soc tree, but we
have not done that so far for arm64 stuff, so I'm not blaming anybody.

The dts changes all look good to me, and I think it's ok to have them
go through your tree this time.

Acked-by: Arnd Bergmann <***@arndb.de>

In the future, we should all have an eye on this more to ensure that
the .dts changes all go through arm-soc.

Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas
2014-10-02 14:36:16 UTC
Permalink
Post by Arnd Bergmann
Post by Bjorn Helgaas
Post by Tanmay Inamdar
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.
X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/23/852
If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.
I applied these on pci/host-xgene (based on pci/host-generic). I hope to
merge these for v3.18. It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.
Those changes should normally go through the arm-soc tree, but we
have not done that so far for arm64 stuff, so I'm not blaming anybody.
The dts changes all look good to me, and I think it's ok to have them
go through your tree this time.
In the future, we should all have an eye on this more to ensure that
the .dts changes all go through arm-soc.
The arch/arm64/boot/dts patch is at the tip of my branch, and I'd be
more than happy to drop it. It would be nice to have it in v3.18
along with the driver, though, so I'll keep it until somebody chimes
in to put it in arm-soc.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tanmay Inamdar
2014-10-02 19:24:09 UTC
Permalink
Post by Bjorn Helgaas
Post by Arnd Bergmann
Post by Bjorn Helgaas
Post by Tanmay Inamdar
This patch adds support for AppliedMicro X-Gene PCIe host controller. The
driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
cards.
X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
support for creating generic pcie bridge from device tree. Liviu's patches
are available here
https://lkml.org/lkml/2014/9/23/852
If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
patches from Liviu must be applied before the patches in this patch set. Also
please use latest xgene u-boot firmware.
I applied these on pci/host-xgene (based on pci/host-generic). I hope to
merge these for v3.18. It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.
Those changes should normally go through the arm-soc tree, but we
have not done that so far for arm64 stuff, so I'm not blaming anybody.
The dts changes all look good to me, and I think it's ok to have them
go through your tree this time.
In the future, we should all have an eye on this more to ensure that
the .dts changes all go through arm-soc.
The arch/arm64/boot/dts patch is at the tip of my branch, and I'd be
more than happy to drop it. It would be nice to have it in v3.18
along with the driver, though, so I'll keep it until somebody chimes
in to put it in arm-soc.
Thanks Bjorn and Arnd.
Post by Bjorn Helgaas
Bjorn
Loading...